Ceiling Fan Installation in Cleburne, TX

Ceiling Fan Installation

Free Estimates

On This Page

Find Local Ceiling Fan Installation Services Near You

A well-placed ceiling fan makes a Cleburne summer far more livable and takes real strain off your air conditioner. Considering an upgrade? Dugger Electric has handled ceiling fan installation services in Cleburne since 1974. Our licensed electricians (TECL #27539) mount every fan on proper support, balance it so it runs quiet, and wire the controls the way you actually want to use them. Estimates are free across Johnson County, and we happily bundle multiple fans in one visit to save you money. Call (817) 678-1289 to get on the schedule.

What to Expect From Our Cleburne Ceiling Fan Installation

  • We confirm the existing box is fan-rated, and when it isn’t, we replace it with a braced box built to carry a spinning load.
  • We match the fan’s blade span to the room size and select the appropriate mounting system or down-rod based on ceiling height and required clearances.
  • We wire the fan for the control you want, whether that’s a wall switch, a remote, or separate control for light and fan speed.
  • We assemble and balance the blades so the finished fan runs smoothly at every speed instead of only the lowest one.
  • We test each speed and the light kit, then clean up so the only thing left behind is a cooler room.

See Why Your Neighbors Trust Us

How Much Does Ceiling Fan Installation Cost in Cleburne?

Replacing an existing fan onto current wiring usually costs $150 to $500, according to Home Guide’s ceiling fan installation cost guide. Adding a fan in a brand-new location requires fresh wiring and a braced box, which moves total costs closer to $400 to $1,000. Your Cleburne fan installation service costs depend on your ceiling height and current wiring setup. We provide firm upfront pricing before starting, and every Johnson County estimate we provide is free of charge. Contact us today to discuss your price estimate and financing options, or to evaluate costs for multi-fan upgrades.

Request a Quote

Serving North Texas


We bring elite electrical services to households and businesses across the region, including:

  • Cleburne
  • Burleson
  • Granbury
  • Fort Worth
  • Glen Rose
  • Hillsboro
  • Weatherford
  • Whitney

Stress-Free Financing

Electrical upgrades are an investment. We offer flexible payment plans so you can prioritize safety without breaking the bank.

View Options

Schedule an Appointment

Select your preferred date and time. A member of our team will contact you to confirm availability and finalize your appointment.

Dugger Electric: Your Local Ceiling Fan Installation Team

Since 1974, Cleburne families and business owners have called Dugger Electric when they need a wobbly, noisy ceiling fan swapped out for a quiet one. As a family-owned business and proud member of the Johnson County Builders Association and Cleburne Chamber of Commerce, we treat our neighbors’ small projects with the same care as major remodels, making sure the mounting box, balance, and controls are handled perfectly. Call (817) 678-1289 to get your room sorted before the heat hits.

  • Can you add a ceiling fan where there's only a light fixture now? Yes. We swap the standard box for a fan-rated braced box. When the room needs it, we run a new control leg, so the fan is both supported and properly switched.
  • Do I need an electrician, or can a handyman handle it? Hanging a fan on sound existing wiring is straightforward work. New wiring, box replacement, or a high ceiling is where it stops being a handyman job and starts being a code and safety question.
  • Why does a ceiling fan wobble? Almost always an unrated box or an unbalanced blade set. We mount to a braced box and balance the blades with precision weights, which settles the wobble at every speed rather than just the slow one.
  • Can you mount fans on high or sloped ceilings? Yes. We carry downrods and sloped-ceiling adapters for the vaulted and two-story rooms that are common in newer Johnson County builds.

Once the fixture box is open and the ladder is up, it’s the cheapest time you will ever get to touch the rest of the room. Homeowners who want to run the fan from a phone or a voice assistant have us fold in smart home installation while we’re already in the ceiling. Also, trading a builder-grade toggle for a dimmer or a fan-speed control is a five-minute add for the light switch services crew, and if the room is due for new cans or a fixture, our lighting installation team handles that on the same trip.

A ceiling fan should be quiet, steady, and easy to control. When it stops doing its job, it is usually better to replace it rather than nursing it along. It might be time for a replacement if:

  • The fan wobbles, rattles, or hums regardless of the speed.
  • The pull chain sticks, the wall switch is unreliable, or the lights flicker.
  • Your room feels stuffy in the afternoon because there is no air movement to help the AC.
  • The motor smells warm, or the blades have simply stopped turning.
  • You are remodeling and want matching, quieter fans throughout the house.
Call (817) 678-1289, and we will get your room comfortable before the next heat wave.

Whether you need one fan in a bedroom or a fan in every room, you get the same dedicated local crew and high standards when you work with our team. Dugger Electric handles the mounting box, balancing, and controls, making the difference between a wobbly fan and a quiet, seamless one. Call (817) 678-1289 or request service online, and we will give you a firm price before any work begins.

Three Ceiling Fan Problems We See Most in Cleburne Homes

After fifty-two years of hanging fans across Johnson County, our electricians can usually name the problem before they reach the top of the ladder. Between the mid-century houses downtown and the subdivisions still filling in on the edges, Cleburne produces its own mix of fan trouble. These are the three we correct most often.

The most common thing we find is a fan bolted to a standard light box that was never built to carry a spinning load. Over time the box works loose, the fan drops a fraction, and the wobble compounds until the mount is genuinely unsafe. We remove the old box and fit a fan-rated braced box anchored into the framing, so the fan carries its own weight the way the code intends.

A fan that shakes or clicks is usually fighting a bent blade, a missing balance weight, or a downrod that never seated straight. Beyond the annoyance, that constant vibration wears through the motor bearings years early. We check the blade set for warping, seat the downrod square, and balance the blades with precision weights until the fan spins smoothly across its whole speed range.

In plenty of homes the fan and its light share a single switch, so you can’t dim the light or slow the fan without reaching for a pull chain. It’s a small daily irritation with a straightforward fix. We run the proper control wiring and fit a switch or remote that separates fan speed from light level, putting the control back on the wall where you’d expect it.