Lighting Repair in Cleburne, TX

Lighting Repair

Service Call and Diagnostic: Includes First Hour of Labor

$150

On This Page

Find Local Lighting Repair Services Near You

A light that flickers, buzzes, or has simply gone dark is often a warning sign of future failure. Is your home protected? Dugger Electric has provided lighting repair in Cleburne since 1974, tracking the fault back to its source whether it lives in the fixture, the switch, the wiring, or the circuit. Our licensed electricians (TECL #27539) fix the problem correctly and confirm the repair is safe, so you’re not chasing the same flicker next month. Estimates are free across Johnson County, and we respond quickly to keep your home well lit. Call (817) 678-1289 to get your lights working right.

What Our Cleburne Lighting Repair Visit Covers

  • We reproduce the fault first, because a light that misbehaves intermittently tells you more while it is misbehaving.
  • We check the terminations at the fixture and the switch before anything else, since a loose connection causes most flicker.
  • We confirm the bulbs, the dimmer, and any driver are compatible, which is where LED conversions may go wrong.
  • We repair or replace whatever actually failed, from a corroded socket to a worn switch or a heat-damaged length of conductor.
  • We test the light across its full dimming range, not just on and off, before calling the repair finished.

See Why Your Neighbors Trust Us

How Much Does Lighting Repair Cost in Cleburne?

Most lighting repairs are modest, often falling in the $80 to $200 range with labor around $50 to $130 an hour, as reflected in this electrical repair cost guide. A loose connection or bad switch is a quick fix, while a fault hidden in the wiring takes more time and resources to trace. We diagnose before quoting so you only pay to fix what is actually wrong, summarizing the full scope of work in a convenient free estimate for all Johnson County homeowners. If a repair reveals a larger issue that you’d like financial help to solve, First Financial Bank financing is available.

Request a Quote

Serving North Texas


We bring elite electrical services to households and businesses across the region, including:

  • Cleburne
  • Burleson
  • Granbury
  • Fort Worth
  • Glen Rose
  • Hillsboro
  • Weatherford
  • Whitney

Stress-Free Financing

Electrical upgrades are an investment. We offer flexible payment plans so you can prioritize safety without breaking the bank.

View Options

Schedule an Appointment

Select your preferred date and time. A member of our team will contact you to confirm availability and finalize your appointment.

Dugger Electric: Your Source for Local Lighting Repair in Johnston County

Since 1974, Cleburne families and business owners have called Dugger Electric when a stubborn flicker points to a hidden wiring fault. As a family-owned business and proud member of the Johnson County Builders Association and Cleburne Chamber of Commerce, our community reputation is built on thorough troubleshooting. We’ll safely diagnose the true issue before simply swapping out parts. Call (817) 678-1289 to resolve your lighting problem at its source.

  • What makes lights flicker? Usually a loose connection, an incompatible dimmer, or a circuit carrying more than it should. Those three need different fixes, so we test first.
  • Why do my LEDs hum on the dimmer? Buzzing or uneven LED dimming may be caused by an incompatible dimmer, lamp or driver. We inspect the equipment and wiring before recommending a compatible replacement.
  • A whole room went dark at once. What happened? That points at the circuit or the switch rather than a bulb. We check the breaker, the switch, and the connections along the run to find where it opened.
  • Do you repair recessed and specialty fixtures? Yes, including recessed cans, track lighting, and exterior units. Sockets, drivers, and ballasts are all replaceable, which is often cheaper than a new fixture.

A light that flickers, buzzes, or won’t dim smoothly is usually the switch, not the bulb. More often than not the light switch services team clears it in one visit; if you would rather modernize than patch, our local lighting installation crew redoes the room instead. When the flicker follows the whole circuit rather than one fixture, that points back at the wiring, and our electrical repair service tracks it to the source.

Lighting trouble is easy to live with at first, but it shouldn’t be ignored. It’s time to call a professional if:

  • Lights flicker, pulse, or dim on their own without any other appliances running.
  • A specific fixture, or an entire room of lights, has gone completely dark.
  • Bulbs burn out noticeably faster in one fixture compared to the rest of the house.
  • A light switch or dimmer buzzes constantly, or a fixture feels unusually warm to the touch.
  • You have to jiggle a switch just to get the light to turn on.
Call (817) 678-1289 to request a free estimate.

Dugger Electric provides comprehensive lighting repair across Cleburne and Johnson County. Call (817) 678-1289, and we will get you on the schedule.

Three Lighting Problems We Repair Most in Cleburne Homes

The widespread adoption of LED lighting across Johnson County has also increased the number of compatibility issues involving older dimmers and newer LED products. Both throw symptoms that look like a failed fixture and usually aren’t. Here are the three we repair most and what sits behind each one.

A light that flickers on its own may have a loose connection somewhere, at the fixture, at the switch, or at a wire nut that worked free across years of heat cycling. That small gap arcs, which is both the flicker you can see and the fire risk you can’t. After completing the approved repair, we test the fixture and related controls to confirm proper operation at the time of service.

The rush to LED left a lot of Cleburne homes with lights that buzz, shimmer, or refuse to dim below half, because the dimmer on the wall was built for incandescent loads. It looks like a fixture problem when it’s really a mismatch. We confirm the bulb and dimmer types and fit a dimmer rated for those LEDs, then set the low-end trim, which is what keeps the range even instead of dropping out at the bottom.

Sometimes the fixture really is the problem, whether that’s a corroded socket, a failed LED driver in a recessed can, or an exterior light that moisture finally reached. These parts wear out, and kitchens, baths, and outdoor spots wear them fastest. We test the fixture, replace the failed socket, driver, or ballast, and reseal outdoor housings, so the light works again without a full replacement.