Whole-Home Rewiring in Cleburne, TX

Whole Home Rewiring

Free Estimates + Financing as low as $99/month

On This Page

Find Whole-Home Rewiring Services Near You

When a home’s wiring is decades old, ungrounded, or simply overwhelmed by modern demand, a full rewire restores safety and capacity for the long haul. Dugger Electric handles whole home rewiring in Cleburne, replacing outdated branch circuits, adding grounding and GFCI protection, and bringing the whole system up to current code. Our licensed electricians (TECL #27539) plan the work to minimize disruption, fish new wiring cleanly, and coordinate the panel and permits. Estimates are free across Johnson County, and a rewire can be financed through First Financial Bank. Call (817) 678-1289 to make your home’s wiring safe again.

What to Expect From a Cleburne Whole-Home Rewire

  • We inspect the existing wiring, the panel, and the grounding, then map a plan that replaces what is unsafe rather than everything indiscriminately.
  • We phase the work by area and restore power to each finished section, so the house stays livable through a long project.
  • We fish new circuits through attics, walls, and crawl spaces, opening finished surfaces only where a run has no other path.
  • We add grounding, GFCI and AFCI protection, and enough circuits and receptacles for how the house is used.
  • We land everything on a properly sized panel, pull the permits, and pass inspection before the job is closed out.

See Why Your Neighbors Trust Us

How Much Does Whole-Home Rewiring Cost in Cleburne?

A whole-home rewire usually runs about $10,000 to $30,000, or roughly $5 to $17 per square foot depending on the home’s size and ease of access per Home Guide’s house rewiring cost guide. Considering an upgrade? We assess your home and give you a clear, itemized estimate for free if you’re a Johnson County homeowner. Contact us today to book yours.

Request a Quote

Serving North Texas


We bring elite electrical services to households and businesses across the region, including:

  • Cleburne
  • Burleson
  • Granbury
  • Fort Worth
  • Glen Rose
  • Hillsboro
  • Weatherford
  • Whitney

Stress-Free Financing

Electrical upgrades are an investment. We offer flexible payment plans so you can prioritize safety without breaking the bank.

View Options

Schedule an Appointment

Select your preferred date and time. A member of our team will contact you to confirm availability and finalize your appointment.

Dugger Electric: Your Local Whole-Home Rewiring Resource for Cleburne and Johnson County Homes

Since 1974, Cleburne families and business owners have called Dugger Electric when aging, unsafe wiring requires a complete whole-home replacement. As a family-owned business and proud member of the Johnson County Builders Association and Cleburne Chamber of Commerce, we understand the framing of local homes, allowing us to phase the work carefully so your house stays livable throughout the project. Call (817) 678-1289 to arrange a thorough electrical assessment.

  • How do I know a rewire is needed rather than repairs? When the problems are everywhere rather than on one circuit. Cloth or aluminum wiring, two-prong outlets throughout, and tripping across the whole service all point the same way.
  • Can we stay in the house? Usually. We phase the work by area and restore power to finished sections, so the house stays livable, though there is disruption while a section is open.
  • Will every wall be opened? Not if the attic and crawlspace give us paths. Most runs can be fished, and we open only where a run has no other route.
  • Does the panel get replaced too? A rewire is the right moment to make sure the service is properly sized. Any panel work gets folded into the same project rather than left for later.

A rewire is open-heart surgery for a house: every circuit is exposed at once, which is exactly why it’s the right moment to fix the rest. It nearly always pairs with an electrical panel upgrade, since new circuits need a panel that can actually serve them, and in the oldest homes our local knob and tube replacement gets rolled into the same scope. With every wire brand new, it’s also the cheapest time you’ll ever have to add whole-home surge protection.

A whole-home rewire is worth investigating if:

  • Your house still has cloth-insulated, aluminum, or outdated knob and tube wiring.
  • Breakers or fuses trip across the entire house rather than staying isolated to a single circuit.
  • The vast majority of your outlets are ungrounded, two-prong receptacles.
  • Power strips and extension cords are heavily relied upon in almost every room.
  • Your outlets, switches, or panel run warm, or you have occasionally noticed a faint burning smell.
Call (817) 678-1289 to book your free estimate.

Outdated wiring is a hidden hazard that remains invisible until it causes a serious problem. Dugger Electric provides whole-home rewiring across Cleburne and Johnson County, carefully phasing the work to keep your house livable throughout the process. Call (817) 678-1289 to arrange a thorough assessment.

Three Wiring Problems That Lead to a Full Rewire in Cleburne

Cleburne’s older neighborhoods carry a lot of history inside their walls, and some of it predates the safety standards everything else in the house now assumes. We evaluate these homes across Johnson County regularly. Here are the three findings that most often lead to a full rewire.

Homes wired in the middle of the last century frequently still carry cloth-insulated or aluminum branch wiring, and both fail in their own way. Cloth insulation goes brittle and crumbles off the conductor, while aluminum expands and contracts until the terminations loosen and start heating. Patching around either one buys time rather than solving anything. A rewire replaces the conductors with modern copper, adds proper grounding, and brings every circuit up to current code.

A house full of two-prong outlets is telling you the branch circuits have no equipment ground, which leaves both people and electronics without a fault path, and a three-prong adapter doesn’t create one. During a rewire we run properly grounded circuits throughout and add GFCI and AFCI protection where code requires it, so every room ends up with the grounded receptacles modern equipment assumes it has.

Wiring installed for a few lamps and a radio was never going to carry central air, an electric kitchen, and thirty devices on chargers, so the circuits stay saturated and the breakers trip constantly. Adding outlets to an overloaded system just spreads the overload around. A rewire adds enough properly sized circuits for how the house is actually used, so it runs cool and has room for whatever gets plugged in next.