Light Switch Services in Cleburne, TX

Light Switches Services

Service Call and Diagnostic: Includes First Hour of Labor

$150

On This Page

Find Light Switch Services Near You

A worn switch that sticks, sparks, or refuses to dim smoothly is a small daily frustration that is easy to fix and worth doing right. Dugger Electric provides light switch services in Cleburne, from replacing tired switches to fitting dimmers, three-way switches, timers, and smart controls. Our licensed electricians (TECL #27539) match the switch to your bulbs and wiring so the control feels smooth and works every time. Estimates are free across Johnson County, and whole-home switch updates can be financed through First Financial Bank. Call (817) 678-1289 to modernize your switches.

What to Expect From Our Cleburne Switch Work

  • We confirm what the circuit needs, whether that is single-pole, three-way, four-way, a timer, a dimmer, or a smart device.
  • We match dimmers to the bulbs actually installed, because that pairing is what decides whether they hum or dim quietly.
  • We replace worn or sparking switches with new devices landed on the screw terminals rather than the push-in slots.
  • We handle the neutral requirement for smart switches and get them onto your network and app before we leave.
  • We test each switch across its full range and tidy the plates so the wall looks finished.

See Why Your Neighbors Trust Us

How Much Do Light Switch Services Cost in Cleburne?

Replacing a light switch generally runs about $50 to $250, a new switch $100 to $300, and dimmers around $80 to $200, per the Home Guide light switch cost guide. Doing several switches in one visit lowers the cost per switch, since the service fee spreads across the job. Your Cleburne price depends on the switch types and the wiring, and estimates across Johnson County are free. For a whole-home switch and dimmer update, First Financial Bank financing is available.

Request a Quote

Serving North Texas


We bring elite electrical services to households and businesses across the region, including:

  • Cleburne
  • Burleson
  • Granbury
  • Fort Worth
  • Glen Rose
  • Hillsboro
  • Weatherford
  • Whitney

Stress-Free Financing

Electrical upgrades are an investment. We offer flexible payment plans so you can prioritize safety without breaking the bank.

View Options

Schedule an Appointment

Select your preferred date and time. A member of our team will contact you to confirm availability and finalize your appointment.

Dugger Electric: Your Source for Local Switch and Dimmer Work

Since 1974, Cleburne families and business owners have called Dugger Electric when a humming dimmer or sticking toggle needs expert attention. As a family-owned business and proud member of the Johnson County Builders Association and Cleburne Chamber of Commerce, our local reputation relies on honest work, so we diagnose the real electrical issue before we ever open a new package to charge you for parts. Call (817) 678-1289 to get your controls working smoothly again.

  • Why does my dimmer buzz? The dimmer is almost certainly rated for incandescent loads and is now driving LEDs that draw a fraction of that. A matched dimmer and a set low-end trim clears it.
  • Can you fit smart switches? Yes, including three-way locations, which is where most DIY attempts stall. We handle the neutral requirement and get them onto your network properly.
  • My switch sparks when I flip it. Is that serious? It means the contacts have worn and are arcing. It will not improve, so the device should be replaced before it fails in a way you notice more.
  • Can one light be controlled from two places? Yes. Three-way and four-way switching lets a light or a group of them work from multiple locations, which is worth doing at the top and bottom of any stairway.

Switches are where lighting and automation meet the wall. If you’re updating the fixtures at the same time, our local lighting installation team works right alongside the switch swap, and if you want to control everything by app, schedule, or voice, that brings in our smart home installation team. A switch that sparks, warms up, or trips its own breaker is a sign the trouble runs deeper than the switch, so our electrical repair service traces the cause. And since a switch job already has us in the walls, older rooms often add local ceiling fan installation and lighting repair to the same visit.

It is time to update or repair your light switches if you notice any of the following:

  • A switch sticks, wiggles loosely in the box, or requires a second flip to actually turn on.
  • The switch or dimmer sparks, buzzes, or feels noticeably warm through the cover plate.
  • Your modern LED bulbs flicker or hum because they are paired with an older, incompatible dimmer.
  • You want the convenience of app or voice controls, but your house still uses basic toggle switches.
  • Your switch plates are cracked, heavily discolored, or painted shut.
Call (817) 678-1289 to book your free estimate.

The right switches make a house feel modern and behave predictably, resulting in the true definition of a home that works for you. Dugger Electric handles all types of switch work across Cleburne and Johnson County, from a simple replacement to outfitting your entire home with smart controls. Call (817) 678-1289 to set up an appointment.

Three Switch Problems We Solve Most in Cleburne Homes

Switches wear out quietly, and the shift to LED lighting introduced a whole category of complaints that didn’t exist twenty years ago. Across Johnson County the same three keep arriving. Here is what each one is really telling you and how we correct it.

After enough years of daily use, the contacts inside a switch wear down, and that shows up as a sticking toggle, a spark when you flip it, or a warm faceplate, all early stages of a failure. We replace the device and land the conductors on the screw terminals rather than the push-in holes on the back, because those backstabbed connections are exactly what works loose over a decade of heat cycling.

The move to LED left a lot of Cleburne homes running bulbs that draw a few watts on dimmers built for sixty. The result is buzzing, shimmering, or a dimmer that does nothing until halfway up. It reads as a bulb problem when it’s really a load mismatch. We fit a dimmer rated for those specific LEDs and set the low-end trim, so the range dims evenly instead of cutting out at the bottom.

Homeowners increasingly want to schedule, dim, or voice-control their lighting, and a basic toggle can’t do any of it. The obstacle is usually the box rather than the switch, because most smart switches need a neutral conductor that older wiring never ran to the switch location. We handle the neutral, fit the device, and set it up on the network, including the three-way locations that trip up most DIY attempts.