Residential Remodeling & New Construction in Cleburne, TX

Residential Remodeling & New Construction

Free Estimate

On This Page

Find Residential Electrical Services Near You

A remodel or new build is your best chance to get the electrical exactly right, from the panel to the last outlet. Dugger Electric handles residential remodeling and new construction wiring in Cleburne, working from the plans to lay out circuits, lighting, and service that fit how you actually live. Our licensed electricians (TECL #27539) coordinate with your builder, handle permits and inspections, and wire the project cleanly the first time. Estimates are free across Johnson County, and projects can be financed through First Financial Bank. Call (817) 678-1289 to plan your build.

What to Expect From Our Cleburne Remodel Wiring

  • We review the drawings and your priorities together, so the electrical design serves the finished rooms rather than the code minimum.
  • We rough in the wiring, the boxes, and the panel ahead of insulation and drywall, sequenced around the other trades.
  • We plan circuits for the loads a house carries now, from the kitchen and HVAC through to charging and a home office.
  • We build in the lighting layouts, the dedicated circuits, and the GFCI and AFCI protection while the walls are still open.
  • We carry the permits and inspections and complete the trim-out, then test everything before the handover.

See Why Your Neighbors Trust Us

How Much Does Remodel and New Construction Wiring Cost in Cleburne?

Dugger Electric Residential Remodeling

Wiring a remodel or new build depends on scope. A full rewire during a major remodel is often priced by the room or the square foot, per Angi’s home rewiring cost guide. Contact us today to book your free estimate.

Request a Quote

Serving North Texas


We bring elite electrical services to households and businesses across the region, including:

  • Cleburne
  • Burleson
  • Granbury
  • Fort Worth
  • Glen Rose
  • Hillsboro
  • Weatherford
  • Whitney

Stress-Free Financing

Electrical upgrades are an investment. We offer flexible payment plans so you can prioritize safety without breaking the bank.

View Options

Schedule an Appointment

Select your preferred date and time. A member of our team will contact you to confirm availability and finalize your appointment.

Dugger Electric: Your Source for Local Remodel and New Construction Wiring in Cleburne

Since 1974, Cleburne families and business owners have called Dugger Electric when a new build or remodel requires flawless electrical planning. As a family-owned business and proud member of the Johnson County Builders Association and Cleburne Chamber of Commerce, we work hand-in-hand with local contractors to design electrical systems that fit how you actually live. Call (817) 678-1289 before your architectural drawings are finalized.

  • Do you work directly with our builder? Yes. We hold our rough-in and trim dates with the builder and the other trades, because electrical sits between framing and everything that follows it.
  • Can you take a single-room remodel? Absolutely. A kitchen or bath is a defined scope with its own circuit and lighting requirements, and we wire those as readily as a whole house.
  • How do we make sure it is not obsolete in five years? By sizing the panel with headroom and roughing in provisions for a charger and heavier loads now, while the walls are open and it costs almost nothing.
  • Do you carry the permits? Yes. The electrical permits and inspections are part of the project, so the work is documented for the appraisal and for whoever buys the house later.

A remodel or new build touches nearly every trade we run, and it’s the one project where planning the electrical up front saves the most money. Most include an electrical panel upgrade to carry the added load, our local lighting installation team lays out the fixtures and switching before the drywall goes up, and our appliance wiring service pulls the dedicated runs the kitchen and laundry need. And anywhere gas appliances go in, carbon monoxide detector installation belongs on the same plan.

It pays to bring an electrician in early if any of this describes your upcoming project:

  • You are building a custom home and need a comprehensive electrical plan designed from the ground up.
  • You are adding a new room, expanding a garage, or building a second story.
  • You are remodeling a kitchen or bathroom that will require fresh circuits and an updated lighting layout.
  • You want the house pre-wired for EV charging, a dedicated home office, or future smart upgrades.
  • Your home’s existing electrical service simply cannot support the new additions you are planning.
Call (817) 678-1289 to request your free estimate.

Dugger Electric manages residential remodel and new construction wiring across Cleburne and Johnson County, designing layouts directly from your plans and ensuring a flawless final inspection. Call (817) 678-1289 to get on our project calendar.

Three Wiring Decisions That Matter Most in Cleburne Builds

Johnson County keeps building, and we wire new homes and major remodels across Cleburne most of the year. What separates a house that feels right from one that fights its occupants is almost always a decision made at rough-in. Here are the three that matter most.

Plenty of houses are wired to the bare code minimum and feel cramped the week the family moves in: too few receptacles, a kitchen short on circuits, nowhere sensible to put a desk. Code is a floor, not a design. We plan circuits around how the rooms actually get used, from the appliance layout to the home office to the media wall, so the finished house has the capacity and the outlet placement it needs.

A house built now should be ready for a charger in the garage and heavier appliance loads later, and adding that capacity after the drywall is up costs several times what it does at rough-in. Running a conduit and leaving panel space is a small line item today. We size the panel with headroom and rough in the provisions, so a future addition is a connection rather than a second project.

Electrical rough-in has to thread between framing, plumbing, and mechanical, and poor sequencing creates conflicts that get resolved with compromises nobody likes. Coordination is most of what keeps a build on schedule. We sequence our rough-in and trim with the builder and the other trades, so the wiring goes in cleanly, passes inspection, and never becomes the reason the finish slips.