Switches & Outlets in Cleburne, TX

Switches & Outlets Services

Service Call and Diagnostic: Includes First Hour of Labor

$150

On This Page

Find Switch & Outlet Services Near You

Outlets and switches are the parts of your electrical system you touch every day, and worn or scarce ones are both an annoyance and a safety concern. Dugger Electric handles switches and outlets in Cleburne, adding new receptacles, replacing failed ones, and upgrading to USB, GFCI, and smart devices. Our licensed electricians (TECL #27539) wire every device securely and correctly so it grips a plug, resists heat, and lasts. Estimates are free across Johnson County, and whole-home refreshes can be financed through First Financial Bank. Call (817) 678-1289 to update your outlets and switches.

What Happens During Cleburne Switch and Outlet Work?

  • We assess which devices to add, replace, or upgrade, and confirm the circuit behind them can support it.
  • We land every conductor on the screw terminals rather than the push-in slots, which is why some devices last decades and others fail early.
  • We add GFCI protection in wet areas and fit USB or smart devices wherever they earn the spot.
  • We ground every device properly and replace ungrounded two-prong receptacles wherever the wiring allows a ground.
  • We test each device and finish with clean plates, so the wall looks intentional rather than repaired.

See Why Your Neighbors Trust Us

How Much Do Switches & Outlets Cost in Cleburne?

Installing or replacing an outlet generally runs about $100 to $300, with switches in a similar range and specialty devices like USB or smart outlets a bit more. The outlet installation cost guide has the ranges. Doing several at once lowers the cost per device, since the service minimum spreads across the job. Your Cleburne price depends on how many devices, what type, and the wiring, and estimates across Johnson County are free. For a whole-home refresh, First Financial Bank financing is available.

Request a Quote

Serving North Texas


We bring elite electrical services to households and businesses across the region, including:

  • Cleburne
  • Burleson
  • Granbury
  • Fort Worth
  • Glen Rose
  • Hillsboro
  • Weatherford
  • Whitney

Stress-Free Financing

Electrical upgrades are an investment. We offer flexible payment plans so you can prioritize safety without breaking the bank.

View Options

Schedule an Appointment

Select your preferred date and time. A member of our team will contact you to confirm availability and finalize your appointment.

Dugger Electric: Your Source for Local Switch and Outlet Work Across Cleburne

Since 1974, Cleburne families and business owners have called Dugger Electric when worn-out receptacles and loose outlets need replacing. As a family-owned business and proud member of the Johnson County Builders Association and Cleburne Chamber of Commerce, our commitment to lasting craftsmanship means we securely land every device on screw terminals so your connections hold strong for decades. Call (817) 678-1289 to update your home’s aging devices.

  • Can outlets be added to a room? Yes. We tap a suitable circuit or run a new one and place the receptacles where they are actually used, which is rarely where the builder put them.
  • Should two-prong outlets be replaced? They are telling you the circuit has no ground. Where the wiring allows we provide a ground, and where it does not, GFCI protection is the code-recognized remedy.
  • Do you fit USB and smart outlets? We do. USB receptacles clear the charger clutter, and smart outlets let you control whatever is plugged in from an app or by voice.
  • Why does an outlet feel warm? A warm receptacle has a failing connection behind it, very often a conductor back-stabbed into the push-in slot. That should be re-terminated before it gets worse.

Switches and outlets are the hardware you interact with most, so upgrading them tends to happen all at once. Wet-area and outdoor safety comes from our local GFCI outlet installation, dimmers and smart controls from our light switch services, and whole-house app and voice control from our smart home installation team.

It’s time to update your outlets and devices if you start noticing any of these warning signs:

  • Outlets feel loose, can no longer grip a plug securely, or feel warm during normal use.
  • You are heavily relying on extension cords and power strips to make up for a lack of wall receptacles.
  • Your house is still utilizing older, ungrounded two-prong outlets.
  • Your switches spark, stick, or require a frustrating second flip just to catch.
  • You want the convenience of built-in USB charging or smart home controls at your most frequently used outlets.
Call (817) 678-1289 to request your free estimate.

Solid, intelligently placed devices make a house safer and significantly easier to live in; delivering a great return for such a small upgrade. Dugger Electric handles switch and outlet upgrades across Cleburne and Johnson County, ensuring everything is wired to last. Call (817) 678-1289 to schedule an appointment.

Three Outlet and Switch Problems We Fix Most in Cleburne

Wall devices get used constantly, so they’re usually the first electrical components in a house to wear out or fall short of how people live now. Across Johnson County the same three keep coming up. Here is what each one is and how we correct it.

An outlet that lets a plug sag out, or feels warm through the plate, has a failing connection, and very often that connection is a conductor back-stabbed into the push-in slot on the device years ago. The contact patch is tiny, so it loosens and arcs. We move the conductors to the screw terminals, replace the worn receptacle, and confirm the connection runs cool, so plugs stay put and the box stops making heat.

Older Cleburne rooms were wired for a lamp and a radio, not four charging devices, a television, and a laptop in every bedroom, so households end up chaining power strips off a single receptacle. That’s a continuous load on a circuit designed for occasional use. We add properly placed outlets on suitable circuits, including USB receptacles where they earn their spot, and the cords go away.

Two-prong receptacles are telling you the circuit has no equipment ground, and fitting a three-prong device onto ungrounded wiring just hides that fact behind a socket that looks correct. We check the wiring, provide a ground or the GFCI protection code permits as a remedy, and replace the devices properly, so what looks safe on the wall is actually safe behind it.